BGP Lab 000 Topology for CCNP LABs
Previous Next
Download Lab: GNS3
Prerequisites:
Cisco IOSv (vios-adventerprisek9-m.vmdk.SPA.156-2.T)
Introduction:
Ideal for practicing eBGP, iBGP, BGP route filtering, Transient AS, Route-Reflector, BGP over IGP, BGP attributes, etc.
Topology configured for both routed protocols (IPv4, IPV6) meaning that you can configure MP-BGP as well, use Loopback 0 interfaces to establish BGP sessions with peers, static routing configured on each router to reach its neighbors' Loopback 0 interfaces (except within AS250, routers need to run IGP of your choice). Static routes to null0 also represent the entire network for AS, when you advertise routes of any AS just use network command, this way: "network 50.0.0.0 mask 255.255.240.0"
Topology:
Download Lab: GNS3
Prerequisites:
Cisco IOSv (vios-adventerprisek9-m.vmdk.SPA.156-2.T)
Introduction:
Ideal for practicing eBGP, iBGP, BGP route filtering, Transient AS, Route-Reflector, BGP over IGP, BGP attributes, etc.
Topology configured for both routed protocols (IPv4, IPV6) meaning that you can configure MP-BGP as well, use Loopback 0 interfaces to establish BGP sessions with peers, static routing configured on each router to reach its neighbors' Loopback 0 interfaces (except within AS250, routers need to run IGP of your choice). Static routes to null0 also represent the entire network for AS, when you advertise routes of any AS just use network command, this way: "network 50.0.0.0 mask 255.255.240.0"
Topology:
Pictures are broken. Can you fix please?
ReplyDeleteHi, Download LAB as GNS3 broken as well, pls can do you fix it :)
ReplyDelete